- Includes: 1x MCR54 4-Channel Multiband RX
- 4 x MTP60 Beltpack Transmitters
- 1 x BPA54 Bottom Plate (1 x 4-Pin Hirose + 2 x TA5-M)
Selected Accessories
PRODUCT DETAILS
Wisycom MCR54 w/ 4 x MTP60 Transmitters & BPA54 Bottom Plate Quad Kit
This Kit Includes:
- 1x MCR54 4-Channel Multiband True Diversity Receiver
- 4x MTP60 Beltpack Transmitters
- 1 x BPA54 Bottom Plate (1 x 4-Pin Hirose + 2 x TA5-M)
Wisycom MCR54 4-Channel Multiband True Diversity Receiver
MCR54 is a camera quadruple true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It’s compatible with most camera’s slots and “multi-slot” mixer accessories.
![]() | Multi-Band RF Tuning Wideband just isn't enough anymore! Upgrade to a Multi-Band system with up 790 MHz tuning range to find your frequency, anywhere in the World. |
![]() | High Density with NB Filters With eight internal receiver boards, the MCR54 boasts an unprecedented capacity for range and reliability. |
![]() | True-Diversity Reliability With the combination of Narrowband Modulation and Linear transmitters, set your channels every 200kHz with-out intermodulation distortion and get an extra 3dB sensitivity. |
![]() | Multi Companding DSP delivers ENC and ENR algorithms for perfect audio in any application with less than 1ms delay – with create and shape presets for the desired sound. It enables the use of third-party transmitters with Wisycom receivers |
Features
- Four channels True Diversity receiver (8 Receiver boards!)
- Exceptional compactness and high robustness
- DSP Analogue & Digital Audio Output (AES3)
- Up to 790 MHz bandwidth in 470/1260 MHz range
- Next Gen Multiband front-end filtering:
- High Q electronically tunable filter in 470-800 MHz
- 1st narrowband filter
- 2nd narrowband filter
- Wideband and Narrowband DSP-FM operation (SW selectable):
- Narrowband allows more 50% band efficiency
- Narrowband allows about 3dB extra sensitivity and noise immunity
- Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
- High contrast OLED display
- Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
- DSP based for extreme flexibility and multi-companding operations
- Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0 (computer SW)
- Rear antenna connectors and micro audio and power adapter
Bands Available
B1 | For Europe and UK market (Included in this bundle) Tunable: 470 ÷ 800 + Fixed Band 1: 960÷1000 + Fixed Band 2: 1045÷1071 MHz |
B2 | For Europe and USA market (Available on request) Tunable: 470 ÷ 800 + Fixed Band 1: 823÷832 + Fixed Band 2: 940÷960 MHz (USA/EU) |
B3 | For Japanese market (Available on request) Tunable: 470 ÷ 800 + Fixed Band 1: 806÷809 + Fixed Band 2: 1240÷1260 MHz (JP) |
Wisycom MTP60 Bodypack Transmitter
MTP60 is a pocket transmitter specially designed for professional wireless microphone applications.
Powered with 2 x AA battery (Alkaline, NiMh, Lithium) or MPRLBP lithium battery (5.55 Wh)
Small bodypack with ergonomic rounded edges for comfort in TV, theater, movies and other applications requiring discreet deployment.
Multi-Band RF
The multi-band MTP60 currently has the widest tuning range of any wireless transmitter on the market offering a massive range of frequencies to choose from.
Bluetooth 5 Long Range
Monitor & control with Bluetooth via Wisycom Manager software or mobile device apps to adjust parameters in real time
Real Time Positioning
Dedicated hardware for accurate real time positioning and advanced user interface for accessibility assistive gestures.
LINEAR Intermodulation FREE
Advanced linear technology eliminates intermodulation distortion for more robust signal, extended range, and the ability to operate multiple transmitters in close proximity to each other without needing an intermod
Ultrasonic HW Protection
Integrated low-pass audio filter eliminates ultrasonic interference from devices such as focus pullers
Embedded Recorder
Simultaneous transmit and audio recording on micro-SD (except in USA)
SW selectable with N Filters
FPGA based signal processing allows easy switching between wide and narrow band operation which, together with “Linear’ mode allows intermod free frequency planning with as little as 200kHz channel spacing
Haptic Engine
An integrated haptic engine that gives tactile feedback with different vibration patterns. This can also be activated by the remote control to discreetly alert users
Features:
- The multi-band MTP60 currently has the widest tuning range of any wireless transmitter on the market (470 to 1075MHz)
- Monitor & control with Bluetooth via Wisycom Manager software or mobile device apps to adjust parameters in real time
- Dedicated hardware allows accurate real time position monitoring with advanced user interface.
- Advanced linear technology (L20mW) eliminates intermodulation distortion for more robust signal
- Embedded recorder to record directly on the MTP60 memory card and integrated Linear Time Code decoding
- Enhanced robustness against self-interferences and antenna performances thru a proprietary “intermodulation cancellation” circuit
- An integrated haptic engine that gives tactile feedback with different vibration patterns
- FPGA based signal processing allows easy switching between wide and narrow band operation
- Miniature design with flexible PCB (no connectors) for extended reliability
- New ENS compander for a totally clear sound
- Powering with 2 x AA battery (Alkaline, NiMh, Lithium) or MPRLBP lithium battery (5.55 Wh)
- Bluetooth interface and mobile app allows full control from mobile or tablet
- Integrated low-pass audio filter eliminates ultrasonic interference from devices such as focus pullers
- Bluetooth 5 Long Range (Class 1, 100mW) with the MRK16 as a bridge allows remote control the MTP60 over hundreds of meters
- Front panel buttons to quickly enter menu thanks to its multiple shortcut combinations
- Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
- 48V phantom power to use wired mic thru the PHA60 accessory
Download the manual here
MCR 54 Specifications
Frequency ranges | MCR54 B1: 470 ÷ 800 + 960÷1000 + 1045÷1071 MHz (UK) MCR54 B2: 470 ÷ 800 + 823÷832 + 940÷960 MHz (USA/EU) MCR54 B3: 470 ÷ 800 + 806÷809 + 1240÷1260 MHz (JP) |
---|---|
Switchable channels | 2400 user programmable frequencies, organized in 40 groups of 60 channels |
Switching-window | up 790 MHz |
Frequencies | microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step. The frequencies can be easily PC reprogrammed with USB C, Bluetooth 5 (long range) or optional UPKmini Programming |
Frequency error | < ± 2.5 ppm, in the rated temperature range |
Modulation | FM mono, wideband or narrowband IFB (SW selectable) |
Peak deviation | ±54 kHz (wideband), ± 40 kHz (narrowband) |
Antenna input impedance | 50 ohm sma type (SWR < 1:2; typ. 1:1.4) |
Sensitivity | 2 μV ( 6 dBμV), for SND/N > 58 dB; 5 μV (14 dBμV), for SND/N > 98 dB in the whole switching-window* |
Amplitude response | < 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV) |
Adjacent chan. selectivity | > 80 dB typical (for channel spacing ≥ 400 kHz) |
Spurious emissions | < 2 nW (typical = 0.1 pW) |
Noise Reduction system | ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis ENS (for live application) Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable |
AF bandwidth | 30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 15 kHz (narrowband) |
Frequency response | ± 0.5 dB in the 30 Hz ÷ 19 kHz range (wideband), ± 0.5 dB in the 30 Hz ÷ 13 kHz (narrowband) |
Distortion | 0.3 % typical |
SND/D ratio (Analogue) | 120 dB typical* |
SND/D ratio (Digital) | > 125 dB typical |
Audio output | Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable) |
Digital sample rate | AES3 @ 48 kHz |
Monitor output | headphone 3.5 mm jack socket |
Managing interface | USB C, Bluetooth 5 (long range) or optional UPKmini Programming |
LEDs | 2 multicolour RGB LEDs to easy indicates Power & Bluetooth 4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX |
Display | OLED 128x64 (white) |
Powering | - External = 5 ÷ 18 Vdc (2.5 W max) - Autonomous. = with optional BCA 54 Battery Module |
Power consumption | 2.5 Watt max (with 4 active receivers) |
Temperature range | -10 ÷ +55 °C |
Dimensions | 104 x 85 x 25 mm (H x W x D) |
Weight | 230g |
*RMS value, 22 Hz / 22 kHz, unweighted |
Configurations
Downloads
Wisycom MTP60 Specifications
Frequency ranges | UK1: 470-663MHz, Max Power 100mW + 960-1075MHz (DME), Max Power 50mW UK2: 510-698MHz, Max Power 100mW + 960-1075MHz (DME), Max Power 50mW |
---|---|
Switchable channels | 2400 managed in 40 groups ofr 60 frequencies completely user customizable |
Switching-window | Up to 362 MHz, depending on band (see Configurations) |
Frequencies | Quartz PLL frequency synthesizer circuit (5 kHz step) |
Frequency error | ±2.5 ppm, in the rated temperature range |
RF Power | switchable typ. 10mW/L10 W/ 20 mW/ L20 mW / 50 mW /100 mW note: in some countries high power can be disabled, for local norm! |
Antenna connector | LEMO-F 1 pin |
Modulation | wideband/narrowband FM, with digital audio conditioning (FPGA) |
Nominal deviation | ±40 kHz Wideband / ±25 kHz Narrowband |
Peak deviation | ±56 kHz Wideband / ±35 kHz Narrowband |
Spurious emissions | < 2 nW |
Telemetry feature | TX transmits also a digitally modulated sub-carrier, suitable for: tone-squelch operating remote battery monitoring optional PTT (push to talk) operation |
Noise Reduction system | ENS - Wisycom Extended-Sound Optimized |
AF bandwidth | 45 Hz ÷ 17 KHz (3dB) in NarrowBand mode (NB) 45 Hz ÷ 20 KHz (3dB) in WideBand mode (WB) |
Distortion | < 0.3 % (0.15 % typ.) |
SND/D ratio (Analogue) | typ. 115 dB (A)rms with 40 kHz deviation; typ. 121 dB (A)rms with 56 kHz deviation Wideband typ. 115 dB (A)rms with 25 kHz deviation; typ. 121 dB (A)rms with 35 kHz deviation Narrowband |
Audio input connector | LEMO 3pin |
Audio input level | from -36 dBu (12mV RMS) to 26 dBu (15.5 V RMS) adjustable in 1 dB steps |
Max input level | +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level |
Storage media | micro SD memory card (.wav files - BWF) |
Time code | Linear time code decoding |
Bit rate | 16 bit / 24 bit / 32 bit |
Sampling rate | 48 kHz |
Managing interface | Bluetooth 5 long range, USB-C, IrDA |
LED | 2 RGB LEDs (red, green and blue) for audio, RF and battery status. 1 LED for recording, 1 LED for battery charger |
Battery lifetime indication | percentage or minute/second |
PTT function | Pin 3 of the AF connector can be setup to an external push button |
Display | High contrast OLED white display (128 x 64 pixels) |
Power supply | 2 x AA battery (Alkaline, NiMh or Lithium), MPRLBP lithium (5.55 Wh) |
Power consumption | 250mA@ 2.6V average (display off, 100mW power) |
Battery life | approx. 10 hours @ 10mW with Alkaline batteries |
Temperature range | -10 ÷ +55 °C |
Dimensions | 75,7mm x 61,4mm x 19,4mm (HxWxD) without clip |
Weight | Approx. 140 g. without batteries (183 g. with lithium batt.) |
- Includes: 1x MCR54 4-Channel Multiband RX
- 4 x MTP60 Beltpack Transmitters
- 1 x BPA54 Bottom Plate (1 x 4-Pin Hirose + 2 x TA5-M)