Lectrosonics SR Battery Sled for SR Receivers (Select Variant)

All versions of the SR receiver can be powered by rechargeable and dry cell batteries by using the battery sled and 9 volt battery adapter. The units are constructed of machined aluminum to maintain the ruggedness and mechanical integrity of the SR receiver

The battery sled allows direct mounting of L and M type rechargeable video camera batteries for stand-alone or on-camera use. The adapter includes two balanced outputs with TA3M connectors and a locking power jack with an integral circuit that automatically selects the battery or external source. The charger supplied with the battery must be used since the battery sled does not include charging circuitry.

SRBATTSLED TOP

A “battery sled” that positions the battery on top of the receiver for mounting on the top of the camera with the LCD and rear panel nomenclature oriented correctly

SRBATTSLED BOTTOM

A “battery sled” that positions the battery on the bottom of the receiver for mounting on the bottom of the camera with the LCD and rear panel nomenclature oriented correctly

Audio Output Connectors

A standard TA3 female connector fits the output jacks on the SRBATTSLED

Battery Life

• The SR receiver operating time with a NP-F570 slim L series battery at full charge is approximately 12 hours. The operating time will typically decrease over the useful life of a rechargeable battery
• Battery life with two Energizer 9 volt alkaline batteries in the optional adapter is approximately 5 hours. The operating time will vary with different brands of alkaline 9V batteries.
• Two LiPolymer 9 volt rechargeable batteries will operate the SR for approximately 6 hours. The operating time will typically decrease over the useful life of a rechargeable battery.