DPA MMP-A Microphone Preamplifier
Ultra transparent transformerless preamplifier with active drive for impedance balancing.
Combine this preamp with any capsule in the DPA d:dicate Recording Microphones series.
No relevant currency found
Ultra transparent transformerless preamplifier with active drive for impedance balancing.
Combine this preamp with any capsule in the DPA d:dicate Recording Microphones series.
Output connector: | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
---|---|
Low-cut frequency, -3 dB: | 8 Hz |
Noise with shorted input, A-weighted: | 0.5 µV |
Output voltage, RMS: | > 5 V |
Output voltage, peak: | > 16 V |
Type of electronic circuit: | Active |
THD@1VRMS, 1kHz: | < 0.2 % |
Dynamic range: | 138 dB |
Switchable attenuator: | 0 dB, -20 dB |
Output impedance: | < 200 ohm |
Output balance principle: | Impedance balancing with Active Drive |
Common Mode Rejection Ratio (CMRR): | > 60 dB |
Power supply (for full specifications): | 48 V Phantom power (± 4 V) |
Current consumption: | 2.8 mA |
Color: | Matte black |
Weight: | 140 g (4.9 oz) |
Diameter: | 19 mm (0.75 in) |
Length: | 147 mm (5.8 in) |
Cable drive capability: | 100 m (328 ft) |
Temperature range: | -40 °C to 45 °C (-40 °F to 113 °F) |
Relative Humidity (RH): | Up to 90 % |
Explore our best selection
SIGN UP FOR OUR NEWSLETTERS
By providing your e-mail, you are agreeing to our privacy policy. Your information will never be shared and you can unsubscribe at any time.
By providing your e-mail, you are agreeing to our privacy policy. Your information will never be shared and you can unsubscribe at any time.