DPA d:dicate 4017B Shotgun Microphone

€1,675.00

(€1,361.79 ex. VAT )
- +

Out of Stock

Restock days Estimated Restock Days: 14
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
  • Uniform off-axis response & highly directional
  • Ideal for use with camera systems
  • 210mm in length and 68g in weight, smallest and lightest boom microphones available

Related Products

Related

Only 2 available
Rycote Invision 7 Mount
Sku: RY-INV7
Part No: 41107
€63.00 (€51.22 Exc. VAT) )
Details

2 in stock now

€66.50 (€54.07 Exc. VAT) )
Details

Out of Stock

Rycote Modular Windshield Kit 3
Sku: RY-WS-KIT3-XLR3
Part No: 86002
€558.50 (€454.07 Exc. VAT) )
Details

Out of Stock

Only 1 available
%
Cinela PIANI-1 Pianissimo Windshield w/ XLR 3-Pin
Sku: CIN-PIANI-1-4017B-LP
Part No: PIANI-1
€879.45 €836.40 (€680.00 Exc. VAT) )
Details

1 in stock now

Sold out
Rycote Super-Softie Windshield 5cm/12cm/15cm/18cm
Sku: RY-WS-SSOFT-12-1922
Part No: 33201
€122.50 (€99.59 Exc. VAT) )
Details

Out of Stock

Only 4 available
Rycote 12cm SGM Foam - 19/22
Sku: RY-FOAM-SGM-12CM-1922
Part No: 104410
€22.50 (€18.29 Exc. VAT) )
Details

4 in stock now

PRODUCT DETAILS

DPA 4017B Shotgun Microphone

Equipped with a highly directional supercardioid pickup pattern, obtained using a supercardioid design with an interference tube that provides excellent off-axis rejection, the DPA 4017B is a short and exceptionally lightweight shotgun microphone that truly measures up to DPA’s impressive reputation for accuracy, clarity, and musicality.

Designed for a broad range of applications, the phantom powered 4017B is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast/ENG/film booming, and even studio recording environments.

  • Excellent RF Immunity
  • Lightweight
  • Uniform off-axis response
  • Highly directional

Tune out the surroundings

Extensive research and development has been undertaken to optimize the sound coming from the sides and behind the microphone. Minimizing the often very un-linear response of a shotgun microphone due to its side lobes is one of the key accomplishments of the 4017B. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications.

Small size, big performance

At just 210 mm (8.3 in) in length and 68 g (2.4 oz) in weight, the aluminum-bodied DPA 4017B is among the smallest and lightest boom microphones available. But that’s not to say that it’s small on performance. Fully immune to RF emission, the 4017B’s 19 mm (0.75 in) condenser cartridge is capable of handling peak SPLs of 152 dB before clipping.

Screwdriver-free filter access

The 4017B features two onboard filters that are activated via an ingenious switching ring design. With the simple twist of two sturdy rings, engineers can implement a high-frequency boost that adds a 4 dB shelf at 8 kHz and a first-order bass roll-off below 120 Hz to minimize handling and wind noise. A permanent third-order high-pass filter at 50 Hz effectively removes unwanted low frequency disturbance from handling and wind noise.

Specifications

 
Directional characteristics:Supercardioid, lobe-shaped
Principle of operation:Pressure gradient, with interference tube
Cartridge type:Pre-polarized condenser
Frequency range:20 Hz - 20 kHz, permanent third order high pass filter at 50 Hz
Frequency range, ± 2 dB, at 60 cm:70 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz
Sensitivity, nominal ± 2 dB at 1 kHz:19 mV/Pa; -34.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted:Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))
Equivalent noise level, ITU-R BS.468-4:Typ. 24 dB (max. 26 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):Typ. 80 dB(A)
Total Harmonic Distortion (THD):< 1 % up to 133 dB SPL peak
Dynamic range:Typ. 119 dB
Max. SPL, peak before clipping:138 dB
Filters:High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
Output impedance:< 150 ohm
Cable drive capability:100 m (328 ft)
Output balance principle:Signal balanced
Common Mode Rejection Ratio (CMRR):> 40 dB
Power supply:48 V Phantom power (± 4 V)
Current consumption:4.5 mA
Connector:XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
Color:Matte black
Weight:68 g (2.4 oz)
Microphone diameter:19 mm (0.75 in)
Capsule diameter:19 mm (0.75 in)
Microphone length:212 mm (8.3 in)
Output voltage, RMS:> 1.8 V
Polarity:+V at Pin 2 for positive sound pressure
Temperature range:-40 °C to 45 °C (14 °F to 113 °F)
Relative Humidity (RH):Up to 90 %

DPA d:dicate 4017B Shotgun Microphone

€1,675.00

(€1,361.79 ex. VAT )
- +

Out of Stock

Restock days Estimated Restock Days: 14
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
  • Uniform off-axis response & highly directional
  • Ideal for use with camera systems
  • 210mm in length and 68g in weight, smallest and lightest boom microphones available